See here for inquiries or consultations regarding laser products
Hours: Weekdays 9:00 a.m. to 5:00 p.m.
(Japan Standard Time)
- Non-Thermal Processing
532 nm Picosecond Hybrid Laser
Specifications
Beam Characteristics
| Wavelength | 532nm(Green) |
|---|---|
| Average Output | >6W |
| Repetition Frequency | ~50kHz |
| Pulse Width | <15ps |
| Beam Diameter | Φ3.0±0.5㎜ |
| Divergence Angle | <0.4mrad |
| Beam Quality | M2<1.2 |
| Spatial Mode | TEM00 |
| Polarization Direction | Linear |
*Specifications are subject to change without notice. Always verify during purchase.
System Configuration
| Laser Head | W505 x D(772) x H169mm 50kg |
|---|---|
| Laser Controller | W427 x D(386) x H180mm 20kg |
| Cooling Method | Laser head (cooled by water), controller (cooled by air) |
| Power Supply | Single phase AC 100 - 240V ± 10%, 50/60 Hz |
| Power Consumption | Up to 1.8kW |
| Warm-up Time | Cold start: 60min (typ.) 、warm start: 15min (typ.) |
| Temperature Stability Guarantee | 15 ~ 30℃ *1 |
| Storage Temperature | 0 ~ 50℃ |
| Humidity (For Both Operation and Storage) | 10 - 85% RH No condensation |
∗1 Temperature stability guarantee... Within ±1℃ of the operating temperature range.
*Specifications are subject to change without notice. Always verify during purchase.
Characteristics & Features
The Denko Series LDH-G0612 is an oscillator developed with a focus on beam quality.
Ideal for drilling and patterning on thin films and relatively low in cost and easy to handle compared to other wavelengths, this device is frequently used for the processing of thin ceramics and metal films.
