![Our Laser Processing Kits](/wp-content/uploads/2023/05/EngLaser-Processing-Kits.jpg)
- An All-In-One Laser Processing Kit That Allows Immediate Processing on the Day of Delivery
- At Spectronix, we offer galvanoscanners, F-theta lenses, and other peripherals in addition to laser oscillators so that customers can use our lasers immediately after delivery. Our kits are compatible with our picosecond laser.
![Laser Processing Kits](/wp-content/themes/original/images/spx/photo01.png)
Processing Kit Structure
![](/wp-content/themes/original/images/spx/kitimg_en.png)
Specifications for Installing the Picosecond Laser
Model | LDH-G2510 | LDH-V1610 | LDH-X0810 |
---|---|---|---|
Wavelength | 532nm | 355nm | 266nm |
Average Output |
>25W@200kHz | >16W@200kHz | >8W@200kHz |
Pulse Width | <15ps@200kHz | <15ps@200kHz | <15ps@200kHz |
M² | <1.3 | <1.4 | <1.5 |
Position Reproducibility |
Up to 10 to 3 μrad depending on galvano control method | ||
Processing Area |
□80mm
(for f160 mm telecentric F-theta lens) |
□80mm
(for f160 mm telecentric F-theta lens) |
□30mm
(for f160 mm telecentric F-theta lens) |
Spot Diameter | φ20μm~
(for f160 mm) |
φ13μm~
(for f160 mm) |
φ17μm~
(for f220 mm) |
Cooling Method |
Laser head (cooled by water), controller (cooled by air) | ||
External Size
(not including the laser head) |
Standard: W750 x D420 x H600 mm 15 kg | ||
Laser Head | W518×D884×H170mm
65kg |
W518×D917×H170mm
66kg |
W1200×D420×H170mm
92kg |
Controller | W430×D394×H192mm
13kg |
W430×D394×H192mm
13kg |
W430×D351×H192mm
13kg |
Power Supply | Single phase AC 100 – 240V ± 10%, 50/60 Hz | ||
Power Consumption |
Up to 2400 W | Up to 2400 W | Up to 2500 W |
Our Processing Kits
*The machine used in the video is a nanosecond device.