LDH-G2510

Non-Thermal Processing
Sample Processing Available
Demo Machine Available

532 nm Picosecond Hybrid Laser

Specifications

Beam Characteristics

Wavelength	532nm(Green)
Average Output	>25W
Repetition Frequency	200kHz~1000kHz
Pulse Width	<15ps
Beam Diameter	φ3.0±0.5mm
Divergence Angle	<0.4 mrad (Full-width)
Beam Quality	M2<1.3
Spatial Mode	TEM00
Polarization Direction	Linear

*Specifications are subject to change without notice. Always verify during purchase.

System Configuration

Laser Head	W518 x D(917) x H170mm 66kg
Laser Controller	W430 x D(394) x H192mm 13kg
Cooling Method	Laser head (cooled by water), controller (cooled by air)
Power Supply	Single phase　AC 100 ~ 240V ± 10%, 50/60Hz
Power Consumption	Up to 2.85kW
Warm-up Time	Cold start: 60 min. (typ.), warm start: 15 min. (typ.)
Temperature Stability Guarantee	15 ~ 30℃ *1
Storage Temperature	0 ~ 50℃
Humidity (For Both Operation and Storage)	10 - 85% RH No condensation

^∗1 Temperature stability guarantee... Within ±1℃ of the operating temperature range.

*Specifications are subject to change without notice. Always verify during purchase.

Characteristics & Features

The LDH-G2510 is a high-power green picosecond laser with a two-stage solid-state amplifier.

The 532 nm wavelength has been widely installed in metal and ceramic material processing machines due to its low cost and ease of handling compared to other wavelengths.